Home
Simple Solution
Our Technology
Our Deliverable
Fire Sprinkler Systems
Ice Plug Detection
Condenser & Chiller Pipe
FAQ
Contact Us

  Sonic Pipe Inspection is now 
 SoniTech NDT Pipe Inspection  


(click the pipe to go to our new website)

           

 Accurate Nondestructive Ultrasonic 
    Pipe Wall Integrity Testing for
        Mission Critical Systems


MIC, pitting, wall loss, corrosion buildup, ice obstruction

Specializing in Fire Sprinkler and Process Pipe Inspection


Satisfies the Assessment of Internal Condition of Piping on sprinkler systems as required every 5 years under chapter 14 of NFPA 25.


Noninvasive ULGW Assessments Prevent Unnecessary:

Loss of valuable inventory or data

Loss of valuable equipment

Lost time

Lost revenue

Risk to human life

Sonic's Lean and Green Predictive Maintenance Program can help prevent those unfortunate circumstances from happening to you.

All of the situations listed above can result from a failure of your fire suppression system (FSS), the most critical (and often overlooked) piping system for any building property, warehouse, or plant operation. 

Although failure of cooling system piping rarely poses risk to human life, lost inventory/data, lost equipment, lost time, and lost revenue can have a significant negative financial impact on a company.

Sonic Pipe Inspection's ultrasonic (UT) Predictive Maintenance Program can non-invasively and accurately scan your pipes with LITTLE to NO impact on your daily operations, thereby providing you the tools to make an educated decision regarding the condition of your system and helping you prevent a catastrophic failure.  

Think you don’t have a problem? Neither did the company whose pipe is shown here. The pipe looks pristine from the outside but the inside tells a very different story. Water tests, pressure tests, or external visual inspection are not sufficient inspection techniques for this critical system.

Pipes are often considered relatively trouble free, but corrosion related failures at fire sprinkler lines have dramatically increased over the past decade due to prolonged deterioration of older systems and inferior materials used in newer pipe. The fact is that ALL metallic pipes corrode.  

Our patented scanning equipment uses a Nondestructive Ultrasonic Technology that can detect corrosion buildup, wall thinning, velocity erosion, pitting, ice plugs, water pockets left in a dry system, or air pockets trapped in a wet system…all at a significantly

                  Lower cost and higher level of detail
 
                         that is unavailable from
 
                  any other pipe inspection service
.


Best of all, we quietly perform our scans while leaving your system fully operational so you can conduct business as usual.  

Sonic Pipe Inspection’s highly detailed reports will show you exactly where your problem areas reside with a color coded map of the scan points for your system, quantitative and qualitative data with actual scan signatures for each scan point, and reference marks on your pipe showing the exact location of each reading.

With this level of detail, you will have the precise data needed to know exactly which sections of pipe are in need of further attention and which sections are in good working order, helping prevent failure of your piping system(s), and ultimately saving your company money and possibly even lives.

Top